SCHED: SetScheduleOptions
Format
SCHED / SetScheduleOptions {AttributeName} <Parameters>
Description
The SCHED SetScheduleOptions Connect command edits the general schedule options for the active schedule.
| {AttributeName} | <Parameters> | Parameters Values |
|---|---|---|
| Description | '<Description>' | '<text string>' in single quotes. Empty string is allowed. |
| General Parameters | ||
| StartTime | <StartTime> | <time string> in one of the formats listed on the DateFormats page. |
| StopTime | <StopTime> | <time string> in one of the formats listed on the DateFormats page. |
| BufferTimesApply | <IsApplicable> <BufferTime> <BufferTimesSplitTasks> | <IsApplicable> is a boolean that indicates whether or not buffer time should be applied to the
schedule
<BufferTime> is the time where buffer times are calculated from. It can either be a date in any of the date formats, or it can be the word Now to indicate real time. This parameter only applies if IsApplicable is set to True <BufferTimesSplitTasks> is a boolean that indicates whether buffer times should affect individual assignments or entire tasks. This parameter only applies if IsApplicable is set to True |
| Algorithm Parameters | ||
| Algorithm | <Algorithm> | "One-Pass", "Sequential", "Multi-Pass", "Neural", "Random", "Squeaky-Wheel", "Greedy", or "Custom"
NOTE: A "Custom" algorithm file path needs to be defined using the CustomAlgorithmFilePath option below before deconflicting the schedule. |
| CustomAlgorithmFilePath | '<FilePath>' | '<FilePath>' is the file path for a custom algorithm file, enclosed in single quotes. The file
path can be an absolute path (ex. C:/STKScheduler/Custom.xml) or a relative path (ex. .\Custom.xml) from
the current schedule file saved location. NOTE: This command must be sent before setting Scheduler's algorithm to Custom, or Scheduler will give an error message when deconflicting the schedule. |
| BestOf | <NumRuns> | NumRuns may be any integer value >=0. Integer indicates number of Random and/or Neural runs compared for schedule solution optimization when these algorithms are selected. |
| RandomSeed | <seed> | Seed may be any integer value >= 0 or -1. The seed will set the random values to allow the algorithm to be deterministic. This applies only to Multi-Pass, Random ,Neural, and Squeaky-Wheel. A value of -1 indicates that the seed will not be set, and the value will be randomly set by scheduler. |
| ExpandEnabled | <True|False> | <True> (default) Maximize tasks will be expanded as normal. <False> Maximize tasks will be assigned for their minimum duration only. |
| EarlyExpandEnabled | <True|False> | <True> (default) When possible, task assignments will be expanded earlier than their original
start time. <False> Maximize tasks will keep their original start time for each assignment. |
| ExpandAssignmentsFirst | <True|False> | <True> Tasks will be maximized before attempting to assign other tasks. <False> (default) Tasks will be assigned for their minimum duration and all tasks will be assigned before those tasks will be expanded. |
| ExpandAfterEachPriorityGroup | <True|False> | <True> Tasks will be expanded after all tasks with the same priority are assigned, before attempting to assign lower-priority tasks. <False> (default) Tasks will be assigned for their minimum duration and all tasks will be assigned before those tasks will be expanded. |
| Task Priority Parameters | ||
| TaskPriority | <Min> <Max> <Convention> | Min and Max values are integers >= 0 Convention parameter is "High" or "Low"; High means that higher number have higher priority, while Low means that lower numbers have a higher priority. |
| Resource Priority Parameters | ||
| ResourcePriority | <Min> <Max> <Convention> | Min and Max values are integers >= 0 Convention parameter is "High" or "Low"; High means that higher number have higher priority, while Low means that lower numbers have a higher priority. |
| Timeslot Score Parameters | ||
| TimeslotScore | <Min> <Max> | Min and Max values are integers from -2,147,483,648 to 2,147,483,647. Higher values make the slot more desirable. |
| FOM Parameters | ||
| FOM | <Kassign> <Kdur> <Kpp> <Kpn> <Kearly> <Kmaxdur> <Kpt> | All parameters are Figure of Merit (FOM) constants and can be any integer value >=0. |
| STK Parameters | ||
| STKscenario {Force} | '<FilePath>' | '<FilePath>' value must be in single quotes. The STK scenario file path can be an absolute path (ex. C:/STKScheduler/Scenario.vdf) or a relative path (ex. .\Scenario.vdf) from the current schedule file saved location. Force is an optional parameter that causes the schedule to switch to a new Scenario path even if the file isn't found. |
| STKTimestep | <timestep> | Sets STK's simulation time step size. Real number, in seconds, >0. |
| SetTimeFromSTK | <True|False> | <True> will set schedule start/stop times from STK scenario start/stop times when scenario is loaded. <False> (default) will set STK start/stop times from schedule start/stop times when scenario is loaded. |
| Notes Parameters | ||
| Notes | '<Notes>' | <Notes> value must be in single quotes. This value can contain special character codes, including carriage returns and line feeds. |
Examples
Changes the values of the StopTime, Algorithm, TaskPriority, and FOM attributes in the active schedule to
2002/07/30_13:06:59, Multi-Pass, 1-10-low, and 5-3-12-20-1-1-1, respectively
SCHED /
SetScheduleOptions StopTime 2002/07/30_13:06:59 Algorithm Multi-Pass TaskPriority 1 10 LOW FOM 5 3 12 20 1 1
1
| Syntax | Example |
|---|---|
| <CommandName> | SCHED / SetScheduleOptions |
| {AttributeName} | StopTime |
| <StopTime> | 2002/07/30_13:06:59 |
| {AttributeName} | Algorithm |
| <Algorithm> | Multi-Pass |
| {AttributeName} | TaskPriority |
| <Min> | 1 |
| <Max> | 10 |
| <Convention> | Low |
| {AttributeName} | FOM |
| <Kassign> | 5 |
| <Kdur> | 3 |
| <Kpp> | 12 |
| <Kpn> | 20 |
| <Kearly> | 1 |
| <Kmaxdur> | 1 |
| <Kpt> | 1 |
Return Message
If activated, Connect returns an acknowledgment message.
Group Membership
This command belongs to the following group(s):
Version
4.3.1 and 5.0
